foto accessory

Orion Flip-Mirror

Orion X-Y Guidestar Finder

Cleaning Set

Powermate T-Ring 1,25" 

 4x Powermate T-Ring 2"

 2x Powermate T-Ring 2"

Meade T2 Rings

Vixen Focaladapter

Vixen Cameraadapter

Vixen Cameraadapter 36,4mm

Vixen Cameraadapter 43mm

Geoptik Micrometer guide scope holder

TeleVue Standard T-Ring Adapter for 2.4"

TeleVue 1.5x Extender for NPis Scopes  

Shutter Control Interface

Shoestring Autoguider - Modul

Orion Off Axis Guider 

Photo adapter for Canon EOS.   

TeleVue Imaging System Nosepiece for 2" Focuser 

The Lacerta MGEN stand alone autoguider (made in Hungary) performs all the tasks you expect of an autoguider, without the help of a computer. It consists essentially of two parts - handbox and camera.
The camera is a true CCD (Sony ICX279AL-E 752x852 Pixel, 3.6x2.7 mm, Pixel ca. 4.7 Mikron) and comes with a standard T2 thread to connect to a guidescope or offaxis guider. Because only the area around the guide star is read out while guiding, the camera readout is very fast. High sensitivity allows to guide safely on a 10mag star with a 90mm guidescope (1 sec. integration intervals), even guiding to a 12mag star (4 sec. integration time) was possible in field tests!

This adapter proved very important within many fields of the astronomy. The extension tube becomes simple screwed into the filter thread of 1,25" Eyepieces or 1,25" Adapter and extends thus by 25mm.

At the telescope side you can screw a filter or adapt even a further extension tube. So you can extend the connector socket, without wobble. 

 

Adaptor from 1.25" to T2 - Focal Adaptor

The TS FA 1 adapter fits into all 1.25" focusers or visual backs. It has a T2 male thread for the adaptation of SLR cameras or other accessories using the T-2 thread.

The FA1 is primarily made for photographical applications requiring an adaptation from 1.25" to T2. SLR cameras can be attached using common T2 rings (see recommended accessories).

1.25" Filter Thread
You can screw 1.25" filters or other parts using the 1.25" filter thread (M28.5x0.6) into the FA 1 adaptor. This allows you to use nebular filters or city-light reduction filters for imaging.

This guide scope is a suitable solution for astrophotographers who need a compact guide scope with low weight but solid mechanical craftsmanship. The multi coated lens of the TSL 705 images stars clearly with up to about 140x magnification.

Extension Tubes from TS

Skywatcher Guidescope Mount - verstellbare Halterung mit Feineinstellung

TS Leitrohr 80/400mm mit justierbaren Rohrschellen und Prismenschiene

TS Off Axis Guider

TS Optics - T2 changing unit - connector and 360° rotation with only 5.5mm optical length

Extension Tube 2" with double sided 2" Filterthread - 30mm

Flatfolie

EL-Dimmer  for Flat Folie